This article details what lead flashing is, why it leaks and how you can repair it to stop your flat roof from leaking.
What is Lead Flashing and where is it used?
Lead flashing is a lead-based protective band used to provide waterproofing and surface protection at roofing intersections – particularly where a flat roof meets a concrete wall.
When fitted correctly, lead flashing will last for years. However, there are two main reasons why lead flashing leaks, leading to a leaking flat roof:
1. Poor installation: lead flashing should be carefully applied to ensure complete coverage. An absence of gaps is important to prevent rainwater from entering the structure.
2 Poor specification: Usually, the wrong code or not enough depth of lead and not providing a deep enough chase line. This allows movement in high winds and encourages water to penetrate behind the flashing and cause a leak in the property.
How can I repair my lead flashing?
Below we present 3 options to repair and replace leaking or defective lead flashing:
1 Replace flashing completely using the correct code lead and depth of chase line.
2 Flash band is used to seal cracks and joints. It should only be used as a short term measure, but it will cover cracks and stop the leaks. It works by providing a self-adhesive backing for sticking to cracks and a and water-repellent coating to repel rainwater.
3 Use a quality silicone sealant to seal cracks or tears. Like flash band, this is a short-term solution and should be avoided during seasons with heavy rainfall. It should eventually be replaced with new lead flashing.
Contact a specialist
Sometimes, many causes of a leaking flat roof go beyond a simple puncture or defective lead flashing. In such cases we recommend you contact a specialist.
If you would like an inspection of your lead flashing, give us a call on 02921 9000 11 today or send an email.
