{"id":264,"date":"2020-10-09T20:21:03","date_gmt":"2020-10-09T19:21:03","guid":{"rendered":"https:\/\/www.strandekflatroofing.co.uk\/blog\/?p=264"},"modified":"2022-12-08T09:20:10","modified_gmt":"2022-12-08T09:20:10","slug":"how-do-you-make-a-fibreglass-flat-roof","status":"publish","type":"post","link":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/","title":{"rendered":"How do you make a fibreglass flat roof?"},"content":{"rendered":"<h1>Step-By-Step Guide: How to Make a Flat Roof Using Fibreglass<\/h1>\n<p><span style=\"font-weight: 400;\">Correct and successful installation of glass fibre (fibreglass &#8211; or GRP) flat roof requires an organised approach, good surface preparation, understanding of the materials in use and procedures and of course, appropriate weather.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">If any of these are absent you are unlikely to achieve a long term satisfactory result.<\/span><\/p>\n<h2><b>What is a fibreglass flat roof?\u00a0<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">A fibreglass flat roof refers to the protective waterproofing membrane installed on top of the insulating and wooden support layers of a flat roof.\u00a0<\/span><\/p>\n<h3><i><span style=\"font-weight: 400;\">What is fibreglass?<\/span><\/i><\/h3>\n<p><span style=\"font-weight: 400;\">Fibreglass is a composite material &#8211; a mixture of polyester resin and glass fibre matting. These components complement each other, creating a strong, lightweight, highly durable and water-resistant structure, making it perfect for flat roofing applications.\u00a0<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: The term \u2018fibreglass\u2019 refers to the resultant composite. Other terminology like \u2018GRP\u2019, short for \u2018glass reinforced polyester\u2019 and even glass fibre (often confused with the reinforcement material).<\/span><\/p>\n<h3><i><span style=\"font-weight: 400;\">Is fibreglass a good roofing material?<\/span><\/i><\/h3>\n<p><span style=\"font-weight: 400;\">Undoubtedly, yes. When installed correctly it is the most durable of flat roofing systems. At Strandek, our team have been installing fibreglass flat roofing systems since 1976. The expected lifetime is over 30 years.\u00a0<\/span><\/p>\n<p><span style=\"font-weight: 400;\">In fact, <a href=\"https:\/\/www.space.com\/10983-space-technology-spinoffs-fabric-roofs.html\" target=\"_blank\" rel=\"noopener noreferrer\">space agencies<\/a>, <a href=\"https:\/\/www.ennomotive.com\/fiberglass-automotive-industry\/\" target=\"_blank\" rel=\"noopener noreferrer\">automotive manufacturers<\/a>, yacht builders and the <a href=\"https:\/\/bedfordreinforced.com\/markets\/military\/\" target=\"_blank\" rel=\"noopener noreferrer\">military<\/a> have all used fibreglass for structural applications in the sea, on the roads, in the air and in space!<\/span><\/p>\n<p><span style=\"font-weight: 400;\">When installing fibreglass, it\u2019s important to get the laminating procedure right. That\u2019s why we\u2019ve outlined a detailed series of instructions for you to follow.\u00a0<\/span><\/p>\n<h3><i><span style=\"font-weight: 400;\">What type of fibreglass is best for me?<\/span><\/i><\/h3>\n<p><span style=\"font-weight: 400;\">There are several types of fiberglassing layers. These are determined by the thickness of the glass fibre reinforcement, which is typically 450, 600 or 2 x 450-gram layers of chopped strand matting (CSM). 450 gram CSM is usually a little too thin (it cannot tolerate foot traffic well), whilst 600 gram CSM is usually preferred as it can tolerate foot traffic and is easier to install. Two layers of glass fibre at 450 gram CSM can also be used, but they are often a little more time-consuming.\u00a0<\/span><\/p>\n<h3><b>What materials, equipment and precautions are needed?<\/b><\/h3>\n<h4><b>Materials<\/b><\/h4>\n<ul>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Glass fibre matting (600 gram CSM)<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Unsaturated polyester resin (more commonly known as polyester resin)<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">MEKP catalyst (used to cure the polyester resin)<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Acetone (for cleaning and diluting resin)<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Polyester resin topcoat\u00a0<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">GRP edge trims (structural supports to be installed around the edges of the roof)<\/span><\/li>\n<\/ul>\n<h4><b>Equipment<\/b><\/h4>\n<p><span style=\"font-weight: 400;\">In addition to skill, the application of fibreglass to a surface requires the correct equipment. In our experience, the following are recommended:<\/span><\/p>\n<ul>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Sheep\u2019s wool roller (not a foam roller &#8211; this will dissolve in resin) &#8211; and handles!<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Paddle roller (metal roller with grooves used to drive out excess air and resin from laminated glass fibre).<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Hand cleaner<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Sandpaper<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Clout nails (for edge trims)<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Stanley knife<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Catalyst dispenser<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Paintbrush &#8211; for complex detailing\u00a0<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Clean mixing buckets &#8211; for mixing catalyst with resin<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Clean mixing tools<\/span><\/li>\n<\/ul>\n<h4><strong>Safety equipment<\/strong><\/h4>\n<ul>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Emergency eyewash<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Gloves\u00a0<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Hi-vis jacket\u00a0<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Goggles<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Hard hat helmet<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Dust\/chemical mask\u00a0<\/span><\/li>\n<\/ul>\n<h3><b>Precautions: health and safety<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Flat roofing with fibreglass materials has several hazards that should be accounted for:<\/span><\/p>\n<ul>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Working at height<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Manual handling<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Asbestos risks<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Chemical exposure (via resin and solvents) &#8211; generally low as the work is outside.\u00a0<\/span><\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Therefore, ladders, gloves, goggles, overalls and a protective mask are all highly recommended. Furthermore, an asbestos assessment and survey is recommended for properties older than 2001 and scaffolding is recommended for safety to prevent falls from height. Emergency eyewash should also be available at all times.\u00a0<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Consider assessing the roof for potential hazards. This should entail a series of <a href=\"https:\/\/www.hse.gov.uk\/construction\/safetytopics\/admin.htm\">construction considerations<\/a> and level of paperwork in advance, centring on a method statement, risk assessment and COSHH form. The UK <a href=\"https:\/\/www.hse.gov.uk\/construction\/safetytopics\/roofwork.htm\" target=\"_blank\" rel=\"noopener noreferrer\">HSE site on roof building<\/a> provides more detailed information.<\/span><\/p>\n<h2><b>Surface Preparation\u00a0<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">We\u2019ll assume that you have installed a layer of timber decking to consist of 18 mm OSB3 Sterling Board (preferably 8x 2 interlocking).<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: plywood is often used as a cheaper alternative. This is not recommended as it is less durable than timber and offers poor adhesion &#8211; unless a G4 primer is used in advance.\u00a0<\/span><\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"wp-image-267 aligncenter\" src=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png\" alt=\"\" width=\"402\" height=\"301\" srcset=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png 300w, https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth.png 720w\" sizes=\"(max-width: 402px) 85vw, 402px\" \/><\/p>\n<p><span style=\"font-weight: 400;\">Some surface preparation from a structural perspective is required in advance. This can usually be summarised as:<\/span><\/p>\n<ul>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Timber decking should be secured to falls using 21 fixings per board secured into the joists<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">Fill and fair any obvious gaps (a perimeter gap against a wall abutment up to 20 mm is acceptable).\u00a0<\/span><\/li>\n<li style=\"font-weight: 400;\"><span style=\"font-weight: 400;\">On the gutter, elevation fix a 50 x 50 tanalised batten onto the fascia and flush with the top of the decking board. This provides support for the edge trims overhanging the gutter and provides correct alignment.<\/span><\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">The next section concerns the glass fibre installation.<\/span><\/p>\n<h2><b>Glass Fibre Installation<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">A dedicated mixing and decanting area with a protective groundsheet or board to contain spillages should be established together with a secure worktop.<\/span><\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"alignnone wp-image-268\" src=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/strandek-flat-roofing-installing-a-fibreglass-flat-roof-in-penarth-225x300.png\" alt=\"\" width=\"258\" height=\"344\" srcset=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/strandek-flat-roofing-installing-a-fibreglass-flat-roof-in-penarth-225x300.png 225w, https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/strandek-flat-roofing-installing-a-fibreglass-flat-roof-in-penarth.png 405w\" sizes=\"(max-width: 258px) 85vw, 258px\" \/><\/p>\n<p><span style=\"font-weight: 400;\">The quantities of materials used will depend on the size of the roof and your supplier will be able to advise accordingly.<\/span><\/p>\n<p><b>Laminating Procedure<\/b><\/p>\n<p><span style=\"font-weight: 400;\">1. Start by securely fixing the appropriate edge trims to all perimeters including wall abutment upstands.\u00a0<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: these are available in 3 m lengths and various profiles to suit.\u00a0<\/span><\/p>\n<p><span style=\"font-weight: 400;\">2. Cut and mitre all corners ready for neatly joining with laminate.<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: the glass mat is usually 920 mm wide and the preferred gauge is 600 gram per square meter matting.\u00a0<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: 450 gram per square meter matting is sometimes used, but this is not recommended as it is a little too thin and cannot tolerate foot traffic unless you use two layers. 600 gram CSM is usually preferred.\u00a0<\/span><\/p>\n<p><span style=\"font-weight: 400;\">3. Carefully measure your roof and cut the matting to size. Allow approximately a 50mm overlap on the joints. Lay the mat on top of the horizontal aspect of the trim only&#8230;not over the vertical edge.<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: it is recommended to undertake the smaller detailing work first such as joints, upstands, outlets (if through a parapet or into a downpipe outlet) first using a small quantity resin mix.\u00a0<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Quite often, and depending on roof size it pays to work in a team of two. One can be providing mixed resin, clean tools, dealing with minor issues allowing the \u2018 laminator\u2019 to progress unhindered and without pressure. The second operative can step in and assist also with laying the mat and paddle rolling following resin application.<\/span><\/p>\n<blockquote>\n<h3><b>How much resin do I need per square meter of 600 gram mat?\u00a0<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">A 600 gram CSM generally requires 1.5 L of resin, so mixing 10 L resin will provide around 6 sq.m of roof surface.\u00a0\u00a0<\/span><\/p><\/blockquote>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: it is highly recommended that you work in manageable amounts; catalysed polyester resin will begin to cure. This will impact the quality of the resin, so always dispense the resin into a separate mixing bucket and then catalyse.\u00a0<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: this, with appropriate catalyst quantity depending on ambient temperature, is quite manageable for two operatives and can be laid comfortably inside 15 minutes. If you are not confident with that quantity then initially halve it and assess your progress building from there.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">4. An initial coating of resin should be applied to the immediate area to be worked on ( ie, size of mat cut), followed by laying down the mat and further resin applied to it.<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: an emulsion binds the strands together and after a minute or so this emulsion breaks down and allows the use of the paddle roller to consolidate the laminate.<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: the surface should not be \u2018flooded\u2019 with resin&#8230;.evidence of this is not just visual; you will find that the roller will tend to plough up the surface. Conversely, too dry a laminate will be obvious with a substantial lack of breakdown of emulsion and resultant surface strands. If the quantities described above are adhered to then neither of these defects should happen.<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: if you find that the resin is setting too quickly\u2026 this will become more evident in the bucket mix\u2026 dispose and mix a fresh batch considering a little less catalyst.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">5. Continue to treat all areas as described. Once all timber surfaces have been coated, allow the resin to cure to a point where you are able to walk on it without sticking to shoe soles.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">6. Continue by checking the entire surface for any defects, e.g. pinholes,\u00a0 dry laminate, protruding strands of the cured mat, unsecured laminate to boards. Correct all errors by cutting out ( grinder), sanding back and patch laminating. Pinholes can be resin overcoated.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">7. Once fully cured a superior final finish can be achieved by lightly sanding the whole laminated surface and removing any superficial debris. This can be better achieved when the laminate has sufficiently hardened and is not an exhaustive procedure.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Finally, you are now ready for the flow coat application.\u00a0<\/span><\/p>\n<h2><b>Flow coat (topcoat) application<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">Flow coat provides a UV protective coating together with aesthetics and may be selected from a choice of colours. Non-slip aggregate is available for intended walk areas like balconies, walkways or terraces.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">This application is relatively quick but it is recommended to undertake awkward surfaces and edge trims before the main roof surface with a small quantity mix.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">This can be applied by roller or brush depending on the size. Take care to protect fascia and adjacent structures (and vehicles) from splashes.\u00a0<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Note: Approximately 1 L of flow coat will cover approximately 2 sq.m of the surface. Again, according to temperatures and required rate of cure appropriate catalyst should be added and thoroughly mixed. Discuss with your supplier.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">1. Taking account of your roof size, mix an appropriate quantity of flow coat and catalyst.\u00a0<\/span><\/p>\n<p>2. One operative should be able to comfortably apply 10 sq.m of flat roof surface in 10 minutes using a new roller refill.<\/p>\n<p><span style=\"font-weight: 400;\">3. Again adjust mix quantity to suit your anticipated rate of application and once applied, allow to cure for up to 24 hours.<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: flow coat will begin to exotherm and set (cure or harden) in the bucket before on the roof (faster than resin). Do not continue use if this occurs and beware the roller will also set,\u00a0 so stop rolling on the roof surface and mix a new batch with a new roller.\u00a0<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: it is not recommended to apply flow coat onto hot surfaces (those estimated to be over 30 degrees Celsius) as this can inhibit cure and leave a tacky surface.\u00a0<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: do not apply if surfaces are frosted or wet or in low temperatures. This again will result in a sub-standard installation; moisture from the frost will affect the adhesion of the resin and low temperatures will interfere with the curing process.\u00a0<\/span><\/p>\n<p><i><span style=\"font-weight: 400;\">Note<\/span><\/i><span style=\"font-weight: 400;\">: if the above general guide is adhered to you will have the benefit of a well-installed fibreglass flat roof that will provide many years of protection. In our experience, a correctly installed fibreglass flat roof should provide 30+ years of protection.<\/span><\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"wp-image-269 aligncenter\" src=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/fibreglass-strandek-flat-roofing-surface-in-penarth-225x300.png\" alt=\"\" width=\"290\" height=\"387\" srcset=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/fibreglass-strandek-flat-roofing-surface-in-penarth-225x300.png 225w, https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/fibreglass-strandek-flat-roofing-surface-in-penarth.png 405w\" sizes=\"(max-width: 290px) 85vw, 290px\" \/><\/p>\n<h3><b>A bit more detail about the materials used&#8230;<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Absolutely essential&#8230;not only for correct results but from a safety perspective.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Always request safety sheets detailing safe handling of all materials employed and take the time to read them. These are now usually available online.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Observe the cautions highlighted and handle accordingly. Examples are acetone&#8230;highly flammable and harmful for skin contact,\u00a0 catalyst ( organic peroxide) harmful to skin, potential self combustible when left in mop-up cloths, harmful with eye contact, the resin is an irritant, combustible and produces harmful vapours in confined areas.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Understand the procedure for disposal of unused mixed resin or flow coat\u2026.a potential fire hazard and never ever pour down a drain.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Understand the correct mixing procedures, quantities required for the area immediately working on, working time available versus temperatures\u2026.a hot day will reduce working material time and less catalyst will be required. A cold day will extend cure times. A wet day will ruin your installation. Remember to protect the timber decking from rainwater exposure at all times.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Note: a good supplier of materials will spend time with you explaining these requirements and will have first-hand knowledge from hands-on experience over many years. We recommend Resin Library as fibreglass material suppliers.\u00a0<\/span><\/p>\n<h2><strong>Frequently Asked Questions<\/strong><\/h2>\n<p><strong>Q. Why should I consider fibreglass over other types of roofing membrane?<\/strong><\/p>\n<p><span style=\"font-weight: 400;\">A. Despite the availability of a huge array of membranes, fibreglass remains structurally the most durable, tough and versatile waterproof roof coating.<\/span><\/p>\n<p><strong>Q. Why is Fibreglass used in the construction industry?<\/strong><\/p>\n<p>A. Fibreglass has <a href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/B9780080378848500275\" target=\"_blank\" rel=\"noopener noreferrer\">superior engineering properties<\/a>, design flexibility is easy to mould and demonstrates high chemical resistance, making it perfect for a range of projects. It combines several desired qualities like a high <a href=\"https:\/\/core.ac.uk\/download\/pdf\/82389366.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">strength-to-weight ratio<\/a>, toughness, chemical resistance, electrical properties, aesthetics. These make it ideal for flat roofing and other building projects.<\/p>\n<p><strong>Q. Do Strandek GRP Systems operate nationally?<\/strong><\/p>\n<p><span style=\"font-weight: 400;\">A. Yes we do and are selected for very prestigious bespoke installations due to our outstanding proven track record since 1976.<\/span><\/p>\n<p><strong>Q. How old are your earliest installations?<\/strong><\/p>\n<p><span style=\"font-weight: 400;\">In 1978 we successfully installed over 3000 Lm of fibreglass gutter linings at Plymouth Royal Naval Dock Yards.\u00a0<\/span><\/p>\n<p><strong>Q. Is EPDM better than Fibreglass?<\/strong><\/p>\n<p>A. No. EPDM is a rubber-like sheet that has the capacity to tear and puncture &#8211; like the inner tube on a bicycle &#8211; leading to leakage. It&#8217;s preferred to fibreglass because it&#8217;s easy to install, but it doesn&#8217;t last as long. Fibreglass is a <a href=\"https:\/\/mars.nasa.gov\/mer\/mission\/spacecraft\/entry-descent-and-landing-configuration\/lander-structure\/\" target=\"_blank\" rel=\"noopener noreferrer\">composite used to build spacecraft<\/a>, that&#8217;s stronger than certain types of steel. It&#8217;s also been shown to <a href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S1877705815007304\" target=\"_blank\" rel=\"noopener noreferrer\">resist high-impact<\/a>.<\/p>\n<p><strong>Q. How would you describe the future for Strandek GRP Systems in relation to customer confidence?<\/strong><\/p>\n<p><span style=\"font-weight: 400;\">With 50 years approaching as a continuous trading company specialising in the glass fibre industry we have substantially invested in the next stage of our future which will greatly expand the range of products and services to the same high standards.<\/span><\/p>\n<p><strong>Q.What do you consider to be the primary requirement for a long-established company?<\/strong><\/p>\n<p><span style=\"font-weight: 400;\">Obviously, a great product and service are essential but we firmly believe that at the very top has to be communication with the client. This is vital and forms the foundation of a relationship.\u00a0 Regular updating on the progress of work including attendance dates,\u00a0 any changes due weather.\u00a0 Essentially never ever keep the customer uninformed.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Step-By-Step Guide: How to Make a Flat Roof Using Fibreglass Correct and successful installation of glass fibre (fibreglass &#8211; or GRP) flat roof requires an organised approach, good surface preparation, understanding of the materials in use and procedures and of course, appropriate weather. If any of these are absent you are unlikely to achieve a<br \/> <a class=\"read-more\" href=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/\" class=\"readmore\">Read More<\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v22.6 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How do you make a fibreglass flat roof? - Strandek Flat Roofing Blog<\/title>\n<meta name=\"description\" content=\"Step-by-step DIY guide on Fibreglass Flat Roof construction, from what materials you need to how to laminate.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How do you make a fibreglass flat roof? - Strandek Flat Roofing Blog\" \/>\n<meta property=\"og:description\" content=\"Step-by-step DIY guide on Fibreglass Flat Roof construction, from what materials you need to how to laminate.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/\" \/>\n<meta property=\"og:site_name\" content=\"Strandek Flat Roofing Blog\" \/>\n<meta property=\"article:published_time\" content=\"2020-10-09T19:21:03+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2022-12-08T09:20:10+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png\" \/>\n<meta name=\"author\" content=\"Strandek Admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Strandek Admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"12 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/\",\"url\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/\",\"name\":\"How do you make a fibreglass flat roof? - Strandek Flat Roofing Blog\",\"isPartOf\":{\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png\",\"datePublished\":\"2020-10-09T19:21:03+00:00\",\"dateModified\":\"2022-12-08T09:20:10+00:00\",\"author\":{\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/#\/schema\/person\/96543a5f3589b73efc886c04b9147e32\"},\"description\":\"Step-by-step DIY guide on Fibreglass Flat Roof construction, from what materials you need to how to laminate.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#primaryimage\",\"url\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png\",\"contentUrl\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How do you make a fibreglass flat roof?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/#website\",\"url\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/\",\"name\":\"Strandek Flat Roofing Blog\",\"description\":\"Just another WordPress site\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/#\/schema\/person\/96543a5f3589b73efc886c04b9147e32\",\"name\":\"Strandek Admin\",\"url\":\"https:\/\/www.strandekflatroofing.co.uk\/blog\/author\/strandekadmin\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How do you make a fibreglass flat roof? - Strandek Flat Roofing Blog","description":"Step-by-step DIY guide on Fibreglass Flat Roof construction, from what materials you need to how to laminate.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/","og_locale":"en_GB","og_type":"article","og_title":"How do you make a fibreglass flat roof? - Strandek Flat Roofing Blog","og_description":"Step-by-step DIY guide on Fibreglass Flat Roof construction, from what materials you need to how to laminate.","og_url":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/","og_site_name":"Strandek Flat Roofing Blog","article_published_time":"2020-10-09T19:21:03+00:00","article_modified_time":"2022-12-08T09:20:10+00:00","og_image":[{"url":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png"}],"author":"Strandek Admin","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Strandek Admin","Estimated reading time":"12 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/","url":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/","name":"How do you make a fibreglass flat roof? - Strandek Flat Roofing Blog","isPartOf":{"@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#primaryimage"},"image":{"@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#primaryimage"},"thumbnailUrl":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png","datePublished":"2020-10-09T19:21:03+00:00","dateModified":"2022-12-08T09:20:10+00:00","author":{"@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/#\/schema\/person\/96543a5f3589b73efc886c04b9147e32"},"description":"Step-by-step DIY guide on Fibreglass Flat Roof construction, from what materials you need to how to laminate.","breadcrumb":{"@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/"]}]},{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#primaryimage","url":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png","contentUrl":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-content\/uploads\/2020\/10\/flat-roof-timber-decking-for-a-flat-roof-in-penarth-300x225.png"},{"@type":"BreadcrumbList","@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/how-do-you-make-a-fibreglass-flat-roof\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.strandekflatroofing.co.uk\/blog\/"},{"@type":"ListItem","position":2,"name":"How do you make a fibreglass flat roof?"}]},{"@type":"WebSite","@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/#website","url":"https:\/\/www.strandekflatroofing.co.uk\/blog\/","name":"Strandek Flat Roofing Blog","description":"Just another WordPress site","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.strandekflatroofing.co.uk\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-GB"},{"@type":"Person","@id":"https:\/\/www.strandekflatroofing.co.uk\/blog\/#\/schema\/person\/96543a5f3589b73efc886c04b9147e32","name":"Strandek Admin","url":"https:\/\/www.strandekflatroofing.co.uk\/blog\/author\/strandekadmin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/posts\/264"}],"collection":[{"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=264"}],"version-history":[{"count":9,"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/posts\/264\/revisions"}],"predecessor-version":[{"id":293,"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/posts\/264\/revisions\/293"}],"wp:attachment":[{"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=264"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=264"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.strandekflatroofing.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=264"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}